7 Useful Tips For Making The Most Of Your Lock For Double Glazed Door

How to Choose a Smart Lock For Double Glazed Door

If you're in search of an intelligent lock designed for double doors, it's important to select one that meets the highest security standards. This includes being SS312 Diamond approved or at the very least Kitemarked to TS007 3 Star, which prevents lock snapping.

Before choosing a smartlock, make sure your doors are pre-drilled with boreholes. In the event that you don't, you might need to install an additional security measure like a hinge bolt.

uPVC Door Locks

Most uPVC doors come with a euro cylinder lock which is located inside the handle and connects to a multi-lock system within the frame of the door. Many older or cheaper uPVC door models come with standard locking mechanisms for cylinders that could be easily snapped, rendering the multi-locking system useless and allowing burglars access to your home. A better quality uPVC door should be fitted with an anti-snap euro-cylinder that is significantly more secure and impossible to tamper with.

Multipoint locks are an extremely popular choice for uPVC doors as it provides more security than the single lock with a cylinder. They tend to be long in appearance and lock at several points on the door and frame to prevent burglars from getting access to the unlocked side of your door.

When choosing a multipoint lock for your uPVC door, make sure that it's approved to the highest security standards. The most secure locks will be certified to SS312 Diamond or at a minimum Kitemarked to the TS007 3 Star standard. Both of these standards have tests to protect against locking snapping.

Keep your uPVC door locks lubricated with a product like WD40 will prolong their lifespan and stop the locking mechanism from becoming stiff, or causing the handle to struggle when it is used. This could indicate that there is a problem with the internal springs which require replacement or it could be an indication that you're using excessive force when locking the door, as it could damage the mechanism.

It is recommended that if you have to replace uPVC locks, you contact locksmiths who specialize in uPVC replacement locks. They can help you decide which lock is suitable for your door, and give you a cost-effective quote. They can also fix any damaged panels and replace handles.

A professional uPVC locksmith typically charges between PS35-PS50 to replace your uPVC door locks. They will offer a service that is efficient, fast and completed to a high standard. They will charge extra for rekeying the locks or board windows that have been broken into.

uPVC Euro Cylinder Locks

Cylinder locks (also known as door barrels) are used in uPVC doors and connect to the multi point locking system inside the door frame. They are also found in internal glazed doors as well as conservatories. They provide an excellent level of security, but they are susceptible to attacks such as bumping or snapping. It is therefore crucial to secure the double-lock uPVC doors before going to bed or leaving your property.

There are a variety of different cylinder locks on the market, and it is important to decide which one best suits your needs before buying. For example, you should consider the frequency you lock your uPVC door and whether you want a keyed alike system that allows all of your doors can be opened with the same key.

The euro cylinder is the most common kind of cylinder. It can be found on the majority of uPVC door. They are typically made from brass and are available in various sizes to fit the majority of doors. The biggest models are typically used for the front and back doors on larger properties.

It is essential to choose a euro cylinder that has been tested to the kitemark standards - SS312 Diamond approved or TS007 3 star and offers protection against drilling bumps and picking, as well as Snapping.

Cylinder locks come in a variety of lengths, and some are able to be offset, meaning that they are only locked from the inside when they are turned to the closed position by turning the handle upwards. It is also essential to think about how much you can afford to spend on your uPVC door lock, as the price will vary based on the level of security that you require as well as the features you want for your new cylinder to have.

When replacing a lock on a cylinder, it is essential to measure your door to ensure that the new lock will fit correctly. To do this, first find the screw fixing cylinder, normally a large headed screw that is in line with the lower end of the cylinder, and then take it off. Then, locate the cylinder on the door and measure from the edge of the lock face to the centre of the screw hole, this is your measurement A. Measure from the edge of your door to the middle including any furniture. This is your measurement B. Make sure that A and B are equal to each other to be sure you've measured correctly.

uPVC Multipoint Locks

Multipoint locking systems are the most secure locks for uPVC and composite doors. These long strip locks are able to run across the length of your door and have multiple hooks and bolts that secure the door when you pull the handle. They offer increased security for your home and come in various styles to suit all door types and tastes. uPVC Multipoint Locks can be found on most composite/timber and new uPVC door styles.

The multipoint lock resists this attack in contrast to Euro Cylinder locks that are susceptible to "lock snapping". The locking points of a multipoint lock are linked to a bar made of steel, which prevents the hooks from moving without removing the key.

The majority of the new uPVC and composite doors will feature an anti-snap multipoint locking fitted as standard, if you're concerned yours may not, then you should have this checked out by your local locksmith. The lock can be identified by opening the door and then looking down the keep (the metal strip which runs along the length of the door) to see the brand's logo, ERA, Avocet, Fuhr or Mila are the most commonly used manufacturers.

The process of winding up the lock can be done by either using the lever on the lock, or turning the key multiple times. After all locking points are engaged then you can use the handle to open and close the doors, and the key deadlocks it. This will release the deadbolt located in the central gearbox.

It's best to purchase your uPVC front door lock from a company that has a specialization in doors and window products. These locks are essential to ensure the safety of your family and home. If the security and locks of your new doors don't meet the standards required purchasing a low-cost multipoint lock could be a false economic choice. This will not only put you family at risk and could also impact the cost of insurance.

uPVC Rim Locks

There are many types of uPVC Rim locks. The basic one is just one that slams shut, as you close the door it will automatically lock, however you can also choose a version which you have to lock manually using the key before leaving the home. These locks aren't able to be opened and are among the most secure options that you can use on your door. They are suitable for timber or wooden doors in homes for domestic use and glass panel doors for commercial buildings. They can be certified in accordance with the latest British Standard BS3621. This means that your insurance provider will offer you a discount on your premium.

Multi-point locks are utilized on uPVC doors as well as composite doors.  double glazing window lock repairs  are extremely secure and provide the highest security for your home. These locks are equipped with multiple locking points that ensure that if you attempt to force the handle open, it will not turn. The locks are designed to make it difficult for burglars to reach the handles, so they aren't able to retract from the outside.

You can also have these locks with a mortice-sashlock for extra protection from people breaking through the window. They are an excellent choice for doors that lead into gardens and outbuildings as they provide extra security from those who climb through the window to gain entry.

If you're worried about your uPVC door or composite door snapping and snapping, we can put in an anti-snap lock to stop this. We install these on our composite doors and are the only uPVC installers in Belvedere who offer this.

We can change your locks outside of hours since we have a mobile vehicle that can be brought to your home. It's a little more expensive price than when we're working during the day, but it's well worth it for the ease and security of having your uPVC doors locked out of hours.